Sherwood S-8250 CP listening update

I had a good audio session last night with this receiver, the characteristics of this unit emphasis a bit more bass and a laid back mid range.

The Sherwood worked really well with my Mission 770 Freedom IV's and the Pioneer HPM-60's. The Paradigm Control Monitors are bass heavy and not as forward in the mid range so the sounds did not work well with these speakers.

The Dual CL390's finished off the night and these speakers brought out the true sound of the receiver, uncovering the warmth that receivers of this era give off.

I have a feeling this receiver will be around for awhile.

Sony SS-E70 reigns supreme

Interesting blog stats show that the Sony SS-E70 speakers are the most sought after search on this blog, mostly from European searches.

These are surprisingly good speakers with a sound signature that is close to my Dual CL390's. The Braun dome mid range and tweeter revel the details in the music more than the Sony's, but they are close.

Funny, these speakers have stuck around for longer than usual.

Week stats:

Month stats:

All time stats:

NAD 712 Receiver

I have had this little NAD 712 receiver doing duty in my office and in the living room for the TV sound for over a year. I have always been a big fan of NAD products and this little receiver deserves a comment on this blog.

Rated at 25 watts per channel this little unit can pump out 75 watts per channel down to 2 ohms, pretty impressive.

The sound is very warm and full, the bass is all there without the need for a loudness button. I enjoy the sleek uncomplicated looks of the NAD. This is a beautiful little amp that can run with the best of them.

My 3 favorites

Late night audiophile buzz with my three favorites.

Dual CL390
Paradigm Control Monitors
Mission 770 Freedom V

Vintage Receiver Advertisements

I want to share this link to a good collection of vintage receiver ads from the late 60's to mid 80's. If you are a fan of these receivers or just need to know more about them follow this link here.

http://www.chrisinmotion.com/ReceiverAds.htm

Great little resource for the vintage audio nut.

Sansui SC-1330 Belt Repair

I picked up this beautiful Sansui SC-1330 cassette deck for $10.00 that needed the main flat belt repaired. These decks are circa 1979-1980, retailed for around $350.00 and by now the original belt had turned to goo.

The deck looks like it was made to complement the Sansui AU-517, AU-717 or the AU-917 line of amps.

First off the main flat belt has an 8" inner circumference and these are hard to track down locally, one must search EBay or other online parts retailers. I opted to take the belt out of a dead Harmon/Kardon CD-91 cassette deck. After mush research I realized that these two decks share the same belt.

The walk through is pretty straight forward with no special tools needed.

Unplug and unscrew the 6 screws holding the black case of the deck.

Once opened you will see the motor assembly and all the working parts surrounding it.

Best to get a bunch of Q-Tips and I found Acetone worked faster than rubbing alcohol, clean all the gooey belt residue off the motor spindle and the main flywheel.

Next is to unscrew the 3 screws on the main motor plate and gently pull back the motor. Carefull doing this ans there are fragile contact plates attached.

Next is to undo the top flywheel screw as shown in the picture and loosen the bottom flywheel plate screw on the bottom.( Loosen but do not remove the bottom screw!)

Now you should be able to lift the flywheel plate and the flywheel high enough to loop the new belt in place. Once the belt is looped in place put the screws back in and tighten the flywheel plate.

With the motor still loose attach the belt around the motor spindle and re-assemble the motor plate into the original position...Note that there is a delicate contact point that needs to rest on the play mechanism and it is crucial that you do not bend the copper film upon re install. The black plastic piece needs to rest on the play mechanism. I found out the hard way. See picture below.

Now tighten the original 3 screws and check to see if the deck functions properly, if it does not work at all re check the contact points. You may have to loosen the 3 motor plate screws to make sure the contact point connect.

If you cassette deck works then replace the cover and enjoy.

It is a pretty easy fix for a nice cassette deck.

Below is a picture of the Harmon/Kardon CD-91 donor deck in which the electronic solenoids stopped working.