Celestion Ditton 110 speakers

This little pair of English speakers came home yesterday, a pair of Celestion Ditton 110 speakers.

A very nice sounding well balanced and neutral pair of bookshelf speakers, typical British sound that is very polite, with nice imaging.

One dome was slightly dents in and a quick shot with the vacuum cleaner popped the dome back out to the best it will get.

These speakers are not as exciting or in your face like Mission speakers that reside with me but more along the lines of the few pairs of B&W speakers that I have had.

Rotel RX-830 Receiver and Mission 700 Leading Edge speaker for sale

Very well balanced and matched system for sale, Rotel RX-830 receiver at 20 watts per channel and a pair of Mission 700 Leading Edge speakers that have been recapped with Solen fast caps.

$200.00

 This system is one of the best stereo's that I have matched, the sound is like you are right there with the musicians in the room.

Ready to pass this along for $200.00 for someone just starting down the road to vintage audio or who is just getting into vinyl. Local Vancouver sale only.

Or for $200 you can buy this type of future land fill from a local retailer.

Email me at bankofdave@gmail.com

Braun L1030 and L830 project

A regular friend of the blog recently dropped in a gorgeous pair of Braun L1030's and 2 pairs of L830's of which one was featured on this blog a while past.

The intention is to rebuild the crossover on these speakers with Solen caps, I finally got around to opening the speakers up and recording all the cap values needed. Next step is ordering the caps from www.solen.ca
A full write up with pictures will follow.

EPI 100V speakers complete rebuild

Along with the Marantz SR1000 I picked up last week also came a mint pair of EPI 100V speakers.

This pair was in incredible shape besides the rotted foams, I decided that it was worth spending the $50.00 in decent Solen Caps, 12 gauge speaker wire, proper replacement foams and gold plated banana terminals.

If one speaker that I regularly come across and is worth the effort in re building it is EPI speakers. these speakers are really simple but with a few tweaks sound absolutely amazing.

First off here is the speaker upon arrival.

Here is the parts laid out for the rebuild, I have already glued one edge of the foams to the woofer.

 
The original caps ans whimpy speaker wire. These have to go as this is the weakest part of the system.

The original spring clips were bypassed with new gold plated banana plugs.

Inside I have the new Solen 10uf caps soldered in and ready to go.

Meanwhile I finished the re foam of the woofers using a 50Hz sine tone method with my iPhone and an amp. This will center the woofer without cutting the dust cap off and shimming.

Before I put everything back together more dampening material was added to help with the back wave from the woofer.

Now put everything back together and enjoy the openness and musicality of these amazing speakers.

 

Marantz SR-1000 Receiver

Another vintage and a first for this blog is a Marantz product that arrived today.

The Marantz SR-1000 receiver was at the end of the era for the great Marantz and was still owned by Superscope, some say this was the beginning of the Philips days, this product was on the cusp.

Although the build quality is probably not as high as the 22XX series it still has all the hallmark signatures and styling of the earlier Marantz products.

This unit is rated at 20 watts per channel into 8 ohms and 25 watts per channel at 4 ohms.The power meters peak at 40 WPC 8ohms and 80WPC at 4 ohms.

More on the listening notes to follow.

Included in the purchase was another mint pair of this blogs favorite EPI 100V speakers. These will get the royal treatment including a full internal upgrade to Solen 10uf caps and proper internal wiring to banana plugs and new foam surrounds, the usual for this audiophile.

Update:

This unit has been powering a pair of 4 ohm Braun L1030's and sounds wonderful and is relatively stress free to the half volume level.  This is a very nice sounding 20WPC receiver that would make a great entry level unit for those just getting into vinyl.

The looks are absolutely gorgeous for an entry level unit, ignore what little is said about this unit on other audio sites this receiver is very open and full, the bass, mid range and treble are spot on along with the imaging.

Aurex SA-5000/Toshiba SA-5000 Receiver

This fine Toshiba SA-5000 re branded as Aurex SA-5000 was a recent gem of a find.When I picked it up the guy said a channel cuts in and out.

I opened it up and gave the pots and switches a good blast with De-Oxit and it has been giving me smooth uncoloured sound for a few days now.

Some say that Aurex was up market Toshiba line, I believe it was probably a house brand for a large retailer as there is no difference between the Aurex SA-5000 and the Toshiba SA-5000.

As far as brands go Toshiba was on top of their game in television in the 80's but their audio line is very far under the radar. Toshiba prided itself on quality and it really shows in this receiver.

Aesthetically it is attractive and the 50WPC is warm, detailed and a pleasure to listen to for hours on end.
The sound stage is spot on and works well all my speakers in the collection. What a treat.

Further specs can be found over at HiFi Engine

Bose 301 Speakers

I picked up a trashed pair of original Bose 301 speakers this week, not that I am a Bose fan, I had a few spare drivers to get these in working order again. The tweeters were fine but the woofers were beyond repair.

I had a spare set of EPI 100T/E woofers that I dropped in along with a CTS 2T2 phenolic ring tweeter.

The crossover I left as is as there was a 2.7uf metal polyester film cap with 5% tolerance, I was not going to invest any more money in these speakers.

The end result is they are now cranking pretty good in a store as I donated them for a greater cause. (They were not worth selling).