KLH Model 21 table radio

Effectively a speaker box with a radio inside this super cool Henry Kloss Model 21 table radio arrived today.

This unit has a wonderful walnut veneer case with super cool Bakelite plastic knobs. These units were well known for their tuning sensitivity and great sound for late 60's gear.

Inside is a small full range driver with a massive magnet that produces great sound. There is even a bass and treble adjustment, that is how good Henry wanted these to sound.

There is plenty of information on these radios and from what I gather the value of these are going higher in terms of collectables.

I will take this unit apart and clean up the case and front grill along with a good cleaning. This is one of the better sites for a write up.

This is a super cool thing to add to my collection.

Vintage Receivers for under $50.00, not any more!

I had a funny conversation with a Craigslist lowballer today that figured that silver faced vintage Radio shack gear was worth $45.00.

I usually sell my gear for a reasonable price and I attempt to repair stuff that is unique and worthy of repairing, which brings me to a pretty rare Realistic STA-111 receiver or for that matter a Realistic System 11.

I opted to not send this unit to the landfill and spent the money on getting it repaired locally, it is worth saving the Made in Japan stuff from the 70's and 80's as opposed to the Made in China crap that is made to the lowest price point only to end up in landfills in about 5 years.

So here is my conversation.

Here is an Angry Bird Bluetooth speaker that people that have no sense of value probably think is cheap.

$66.00 will get you this future piece of landfill junk but $45.00 for something made well and sounds great when people actually cared for those qualities is insulting, now it could be that this CL Lowballer is financially embarrassed.

I had a quick check on CL to see what was available in receivers for sub $100 locally, outside of plenty of Black Plastic Crap and HT 5.1, 6.1. 7.1  I found two that where of the Silver faced type, both I would pass on, but my new found ex friend figures he can do better.

I did offer up a nice Yamaha HT unit for $50.00 but I guess that was $5.00 out of his price range too.

Harman Kardon The Lute A220

This Harman/Kardon A220 "The Lute" has been on loan to me this week, a little wonderful 12-15 watt push pull tube amp.

This unit was brought up from the USA and has gone through a full refurbish locally.

A beautiful sounding unit that oozes all the goodness of tubes that I often write about on this blog. This unit is in exceptionally good condition.

Marantz Model 28 update

I just got this lovely Marantz Model 28 back from Pure Sound locally and this little unit sounds absolutely wonderful for 20WPC.

This is a late 60's early 70's model that came out before the 22XX models. I like this era of solid state receivers as I find they are modeled closest to a push pull tube amp and this unit has that sound. Under normal listening conditions the bass is full, mid range is smooth and the highs are not as crisp as a single ended tube amp but pleasant just the same.

Imaging in the mid range is pretty nice with this unit, with a nice deep three dimensional sound stage.

This unit was noisy in the right channel when arrived and it has since been serviced at Pure Sound, a few transistors had to be replaced. All capacitors checked out to be fine. This unit still has minimal noise but it is very low and I will accept that given the age of the unit. The noise does not interfere with the music at all.

November update:

Since buying a Magnavox push pull tube amp, I would put the sound of this receiver near to the sound of the Magnavox. Not as lush in the mid range and a little brashy in the upper mids to low highs but a real solid sound stage that sounds magnificent. this unit matches well with the more efficient speakers that I own. this piece will be staying in the collection.

Electrohome Lorainne 40 Push Pull EL84 tube amp

Another piece of fine audio equipment came home from the same place as the EMI 630 speakers, this 20WPC Electrohome Lorainne 40 push/pull tube amplifier.

This unit has had some previous work done to it with separate volume pots, handles on the side and feet attached to the bottom.

The 12AX7 tubes are Mullard/Amperex tubes that flash upon start up.

So I now have the best of both worlds with an Electrohome Marseilles Single Ended tube amp and this Electrohome Push/Pull.

On first impressions the Electrohome P/P is much louder and can drive all my speakers to a pretty decent decibel level where as the Electrohome SET can only push my most efficient speakers to the 98-100db level, which is plenty loud.

I was expecting more bass from the  and the bass that is there is well controlled, the mids and highs are clean and transparent along with the imaging. Where I find the biggest difference is the open and luscious mid range and highs that the Electrohome Single Ended offers up, it just can not be beat. Once the mids and highs are this good the three dimensional imaging is spot on with a single ended tube amp.

There is a fantastic write up called "Single Ended vs. Push Pull: The fight of the Century" by Eddie Vaughn, it is a good overview of both amplifiers.

Just like the analogue vs. digital, New England vs. West Coast, solid state vs. tube and single ended vs. push pull you will get diehards defending either argument.

So, where does my bias lean towards? I seem to like the pure Class A sound of a single ended tube amp more than the Class A/B of the push pull, both are great but the Single Ended just nudges out the Push/Pull with the open mid range and sparkling highs.

EMI 630 Speakers

A rare sight to find these England made dual concentric speakers in the used market, these speakers or EMI speakers have been rumored to have been used in recording studios in England.

These speakers were designed around the use of tube amps and are very efficient. Smaller than the Isophon PH2132E speakers with a little more bass and the mid range set back just a bit.

Interesting to see the inductor coil wrapped around the capacitor in the crossover.

These speakers sound magnificent and image really well.

Plenty of further information can be found through the Ebay site on EMI and these speakers.

These speakers from my research seem to have a cult following in Asia, Japan and Honk Kong these speakers seem to command a premium compared to the North American market.

Mission 700 speakers finished

Finally got to the finish line today with this my second pair of original Mission 700 speakers.

I opted to re foam not in the inverted method as original as the foam angle did not match the original. No harm done just a different aesthetic . I noticed that one of the original tweeters had been replaced with another Vifa T-D19.

The cabinets are pretty mint on this pair and I love the look of the white baffle with the Mission logo.

These sound pretty sweet on the tube amp with great imaging side to side and front to back. the bass is not as deep as others in the collection right now but the mid range and highs are sweet and luscious.

Here is a link to how these arrived.

With solid state amps I always found the Vifa T-D19 to be shrill and fatiguing, with the tube amp it is way smoother, what a joy.